junuylia 发表于 2011-1-15 00:43
It might be  the problem of system memory.

The code works on my SAS 9.2

When using the statement 'weight f', SAS tends to allocate excessive memory and fails to use methods with less memory. There is a solution on this website http://www.listserv.uga.edu/cgi- ... 05c&L=sas-l&P=43384 .

An alternative solution is you just extend your memory or using memory by
options MEXECSIZE=128k;

baoaibaobao 发表于 2011-1-16 09:08
8# guo.bailing 换头像了啊，原来那个挺晕乎的，还是这个清晰！

huangjinran 发表于 2011-1-21 15:54
从你给出的信息来看，我猜测是你的SAS软件有问题，装是装成功了，但可能安装介质里的有些东西损坏或缺失，造成SAS跑不了代码

zsushenye 发表于 2011-3-10 20:39
以前遇到一个类似的，但是是因为9.2默认的pagesize过小，改成下面的试下吧，good luck

options pagesize=max;