全部版块 我的主页
论坛 计量经济学与统计论坛 五区 计量经济学与统计软件 LISREL、AMOS等结构方程模型分析软件
5752 5
2010-05-21
本人初次使用Lisrel,搞不懂。现在麻烦各位高手解释解释下面的运行结果表示什么?错误出现在哪里?

下面是按了Run Lisrel后的运行结果


                                DATE:  5/21/2010
                                  TIME: 22:02

                                L I S R E L  8.70
                                       BY
                         Karl G. J攔eskog & Dag S攔bom

                    This program is published exclusively by
                    Scientific Software International, Inc.
                       7383 N. Lincoln Avenue, Suite 100
                        Lincolnwood, IL 60712, U.S.A.
            Phone: (800)247-6113, (847)675-0720, Fax: (847)675-2140
        Copyright by Scientific Software International, Inc., 1981-2004
          Use of this program is subject to the terms specified in the
                        Universal Copyright Convention.
                          
The following lines were read from file C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\test.LPJ:
TI
DA NI=12 NO=88 MA=CM
LA
V1 V2 V3 C1 C2 R1 R2 S1 S2 CS1
CS2 CS3
CM FI='C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\tes' SY
F_A_T_A_L E_R_R_O_R : FILE C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\tes NOT FOUND
                                DATE:  5/21/2010
                                  TIME: 22:02

                                L I S R E L  8.70
                                       BY
                         Karl G. J攔eskog & Dag S攔bom

                    This program is published exclusively by
                    Scientific Software International, Inc.
                       7383 N. Lincoln Avenue, Suite 100
                        Lincolnwood, IL 60712, U.S.A.
            Phone: (800)247-6113, (847)675-0720, Fax: (847)675-2140
        Copyright by Scientific Software International, Inc., 1981-2004
          Use of this program is subject to the terms specified in the
                        Universal Copyright Convention.
                          
The following lines were read from file C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\test.LPJ:
MO NX=12 NK=4 TD=SY
LK
有效性 便利性 保密性 满意度
FR LX(1,1) LX(2,1) LX(3,1) LX(4,2) LX(5,2) LX(6,2) LX(7,2) LX(8,3) LX(9,3)
FR LX(10,4) LX(11,4) LX(12,4)
PD
OU
   F_A_T_A_L  E_R_R_O_R: A line 'Observed Variables' or a DA line
                         must follow immediately after title lines
                           Time used:    0.031 Seconds


1.jpg       运行后的结果          2.jpg   问题出现在哪?
附件列表
1.jpg

原图尺寸 49.99 KB

1.jpg

二维码

扫码加我 拉你入群

请注明:姓名-公司-职位

以便审核进群资格,未注明则拒绝

全部回复
2010-5-21 22:07:47
补充一下,这是画图后生成的语法。

TI                                                                             
DA NI=12 NO=88 MA=CM
LA
V1 V2 V3 C1 C2 R1 R2 S1 S2 CS1
CS2 CS3  
CM FI='C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\tes' SY
MO NX=12 NK=4 TD=SY
LK
有效性 便利性 保密性 满意度
FR LX(1,1) LX(2,1) LX(3,1) LX(4,2) LX(5,2) LX(6,2) LX(7,2) LX(8,3) LX(9,3)
FR LX(10,4) LX(11,4) LX(12,4)
PD
OU
二维码

扫码加我 拉你入群

请注明:姓名-公司-职位

以便审核进群资格,未注明则拒绝

2010-5-23 01:29:06
“F_A_T_A_L E_R_R_O_R : FILE C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\tes NOT FOUND”可能原因是你建立的文件夹“论文”,是中文名字,有时候会被告诉找不到它,最好改成英文。另外文件夹名字不要包含空格。
二维码

扫码加我 拉你入群

请注明:姓名-公司-职位

以便审核进群资格,未注明则拒绝

2010-7-12 20:44:24
CM FI='C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\tes' SY
应该是程序的问题,上面的这句程序有个部分没有写全,应该写成:
CM FI='C:\Documents and Settings\Administrator\桌面\Janky 论文\sem\test.cov' SY
你试试看,当然文件名不一定是test,你自己命名的,应该知道
二维码

扫码加我 拉你入群

请注明:姓名-公司-职位

以便审核进群资格,未注明则拒绝

2013-4-19 15:07:48
我今天遇到了,原来是因为没有保存的原因
二维码

扫码加我 拉你入群

请注明:姓名-公司-职位

以便审核进群资格,未注明则拒绝

2013-11-29 14:39:45
landboy 发表于 2013-4-19 15:07
我今天遇到了,原来是因为没有保存的原因
是哪里没有保存造成的啊 我做了几次都出不来结果
二维码

扫码加我 拉你入群

请注明:姓名-公司-职位

以便审核进群资格,未注明则拒绝

相关推荐
栏目导航
热门文章
推荐文章

说点什么

分享

扫码加好友,拉您进群
各岗位、行业、专业交流群